The Takeoff Toolbar buttons correspond to the same items in the pull-down menus and provide shortcuts in performing functions. These functions are used in Takeoff File Maintenance.
To make selections, you may either use the pull-down menus or the Toolbar buttons. This example shows the Takeoff File pull-down menu with Next Section highlighted. To make a selection from a pull-down menu highlight the option (using either a mouse or the PowerPad's arrow keys) and click with the mouse primary button or press Enter on the PowerPad.
Note: If the Esti-Sketch plug-in is installed on your system, an additional pull-down menu is available, Sketch. See the Esti-Sketch Program Manual for information about that program.
Figure 1 shows the Toolbar for Estimating Series Takeoff, with buttons labeled below. To select a Toolbar option, simply click on it using the primary mouse button.
Figure 1
|
1. Open a Section |
16. Paste |
|
2. Close current Section/Open another |
17. Insert a Takeoff Note |
|
3. Save the active Section |
18. Attach a File |
|
4. Select/Deselect all items |
19. Apply a Design Specification change |
|
5. Active Levels |
20. Add |
|
6. Filter takeoff according to levels |
21. Delete |
|
7. Toggle Expanded/Collapsed states in Assemblies |
22. Edit |
|
8. Toggle Assembly Wizard On/Off |
23. Insert Item |
|
9. Undo the last action |
24. Print |
|
10. Find |
25. Print Preview |
|
11. Find Next |
26. Go to Summary |
|
12. Lookup |
27. Quote Master |
|
13. TraSer Pro Link |
28. Exit |
|
14. Cut the selection, put in Clipboard (inactive) |
29. Display program information |
|
15. Copy the selection, put in Clipboard |
30. Context- Sensitive Help |