You are here:

Editing Pressure Tables

All of the menu selections and tool bar buttons are standard throughout File Maintenance.

To add or edit a Pressure Table, highlight its line first. Then, there are several ways to access the editing display:

Select Edit > Edit
Right-click the mouse and select Edit Item.

The Edit Pressure Table window displays. See

#: The chronological number assigned to each new pressure table.

ID: This is a shortened description of the item.

DESCRIPTION: This is the full description of the item.

MATERIAL: Taken from the Databook, this is the material type that is used for the pressure table.

LABOR TABLES: These are the labor tables that will be applied when the pressure table taken off. The selections are primary and alternate.

STD. LENGTHS: Stands for Standard Length. The values entered here edit the band for each length, so the value assigned to each length becomes the standard length.

MAX SIZE UOM: Sets the maximum size of the unit of measure.

If you are adding a Pressure Table, the Edit field is blank when first accessed.

Certain Edit selections (namely Edit, Copy, Paste, and Delete) can also be accessed by clicking the secondary mouse button (right button for right-handed users; left button for left-handed users) once on a highlighted item. This displays an Edit menu.

When determining which reinforcement to use, if "Same Angle" is checked for either the width or depth, then both sides will use the angle of the larger side.